Creality CR-10 or CR-10S

What is Creality CR-10?

CR-10 is a 3D desktop printer made by the Chinese company Creality. It was released in 2016 and has been one of the most popular printers since then.

What is Creality CR-10S?

CR-10S is an upgraded version of the CR-10 with some new features such as resume printing, filament detection, and double Z axis lead screws.

Differences:

The main difference between the CR-10 and CR-10S is the addition of a resume printing feature on the CR-10S. This means that if your power goes out or your printer loses power, it will remember where it left off and pick up from there when power is restored. The CR-10 does not have this feature.

Similarities:

Both the CR-10 and CR-10S use FDM (fused deposition modeling) technology to print 3D objects. They both have a build volume of 300x300x400mm, and they both use 1.75mm filament.

Creality CR-10 or CR-10S

Comparison of Electronics:

The CR-10 and CR-10S use the same electronics. Both printers have a power supply, main board, stepper motor drivers, and an LCD screen. The only difference is that the CR-10S has an extra filament detection sensor.

Comparison of Build Volume:

Both the CR-10 and CR-10S have a build volume of 300x300x400mm. This means that they can both print objects that are up to 400mm tall, 300mm wide, and 300mm deep.

Comparison of Filament Type:

Both the CR-10 and CR-10S use 1.75mm filament. This is a standard size for 3D printer filament, and it is compatible with most 3D printers on the market.

Comparison of Extruders:

Both the CR-10 and CR-10S use single extruder setups. This means that they can only print with one color at a time. If you want to print with multiple colors, you will need to buy a multi-extruder setup.

Comparison of Print Speed:

Both the CR-10 and CR-10S have a maximum print speed of 200mm/s. This is a pretty standard print speed for FDM 3D printers.

Comparison of Hardware:

Both the CR-10 and CR-10S use the same hardware. Both printers have a power supply, main board, stepper motor drivers, and an LCD screen. The only difference is that the CR-10S has an extra filament detection sensor.

Comparison of Software:

Both the CR-10 and CR-10S use the same Cura software. This software is used to slice 3D models into printable files. It is compatible with most 3D printers on the market. The only difference is that the CR-10S has an extra filament detection sensor.

Comparison of Connectivity:

Both the CR-10 and CR-10S have USB connectivity. This means that they can be connected to a computer using a USB cable. The CR-10S also has an SD card slot, which means that it can be used without a computer.

Comparison of Print Quality:

Both the CR-10 and CR-10S have excellent print quality. They both use FDM technology, which is known for its high accuracy and low layer height. The only difference is that the CR-10S has an extra filament detection sensor.

Comparison of Mechanics:

Both the CR-10 and CR-10S use the same mechanics. Both printers have a power supply, main board, stepper motor drivers, and an LCD screen. The only difference is that the CR-10S has an extra filament detection sensor.

Comparison of features:

The CR-10 and CR-10S have many of the same features. They both use FDM technology, have a build volume of 300x300x400mm, use 1.75mm filament, have a maximum print speed of 200mm/s, and use the same Cura software. The only difference is that the CR-10S has an extra filament detection sensor and resume printing capability.

Comparison of Design:

The CR-10 and CR-10S have the same design. They both use FDM technology, have a build volume of 300x300x400mm, use 1.75mm filament, have a maximum print speed of 200mm/s, and use the same Cura software. The only difference is that the CR-10S has an extra filament detection sensor and resume printing capability.

Comparison of ease of use:

The CR-10 and CR-10S are both easy to use. They both use FDM technology, have a build volume of 300x300x400mm, use 1.75mm filament, have a maximum print speed of 200mm/s, and use the same Cura software. The only difference is that the CR-10S has an extra filament detection sensor and resume printing capability.

For Beginners which is better?

The CR-10S is the better option for beginners. It has an extra filament detection sensor that makes it easier to use, and it also has resume printing capability. This means that if you make a mistake, you can easily fix it and continue printing.

Conclusion
The CR-10 and CR-10S are very similar 3D printers. They both use FDM technology, have a build volume of 300x300x400mm, use 1.75mm filament, have a maximum print speed of 200mm/s, and use the same Cura software.

The only difference is that the CR-10S has an extra filament detection sensor and resume printing capability. If you need these features, then the CR-10S is the better choice. Otherwise, the CR-10 is a great printer that will suit your needs.

FAQ’s:

1. What is the difference between the CR-10 and CR-10S?

Ans: The CR-10S is a newer version of the CR-10. It has an extra filament detection sensor and resume printing capability.

2. Which printer is better for multi-color prints?

Ans: The CR-10S is better for multi-color prints because it has an extra filament detection sensor.

3. What is the maximum print speed of the CR-10 and CR-10S?

Ans: The maximum print speed of the CR-10 and CR-10S is 200mm/s.

4. What type of software do the CR-10 and CR-10S use?

Ans: Both printers use Cura software, which is used to slice 3D models into printable files.

5. What is the build volume of the CR-10 and CR-10S?

Ans: The build volume of both printers is 300x300x400mm.

6. What types of filament can be used with the CR-10 and CR-10S?

Ans: Both printers use 1.75mm filament.

7. How are the CR-10 and CR-10S powered?

Ans: Both printers have a power supply, main board, stepper motor drivers, and an LCD screen.

8. What is the warranty for the CR-10 and CR-10S?

Ans: The warranty for both printers is one year.

9. What should I do if my print quality is not as good as it should be?

Ans: If you are not happy with the quality of your prints, you can try calibrating your printer or changing the settings in Cura.

10. I want to upgrade my CR-10S, what are some recommended upgrades?

Ans: Some recommended upgrades for the CR-10S include a glass bed, a better power supply, and higher quality fans.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published.