Creality 3D CR 10s pro v2 vs Prusa i3 mk3

In the market for a 3D printer? You may be wondering if you should go with a Creality CR-10S Pro V2 or a Prusa i3 MK3. Both printers have their pros and cons, so let’s take a closer look at each option.

What is 3D printer:

A 3D printer is a machine that creates three-dimensional objects from digital models. You can use 3D printers to create everything from small figurines to large structural components.

Creality 3D CR 10s pro v2 vs Prusa i3 mk3

Creality CR-10S Pro V2:

The Creality CR-10S Pro V2 is a great 3D printer for those who are just starting out. It’s easy to set up and use, and it produces high-quality prints. The CR-10S Pro V2 also has a large build volume, making it perfect for larger projects.

However, there are some downsides to the CR-10S Pro V2. It can be noisy when it’s printing, and it doesn’t have a heated bed, which can make it difficult to print certain materials.

Specification:

Print technology:

Fused Filament Fabrication

Maximum build volume:

10.6 x 10.6 x 9.8 inches

Noise level:

50dB

Electronics:

Arduino Mega 2560

Software:

Cura, Slic3r

Hardware:

Steel frame

Filament diameter: 1.75mm

Print Material:

PLA, ABS, PETG, TPU, Wood

Print Quality:

High

 

Prusa i3 MK3:

The Prusa i3 MK3 is a great 3D printer for those who are looking for a more advanced machine. It has a heated bed, which makes it perfect for printing with a variety of materials. The MK3 also has a larger build volume than the CR-10S Pro V2.

However, the MK3 is more expensive than the CR-10S Pro V2, and it requires more setup time.

Specification:

Print technology:

Fused Filament Fabrication

Maximum build volume:

8.9 x 8.9 x 8 inches

Noise level:

50dB

Electronics:

Arduino Mega 2560, Gen7Board

Software:

Cura, Slic3r

Hardware:

Steel frame

Filament diameter: 1.75mm

Print Material:

PLA, ABS, PETG, TPU, Wood, HIPS, PVA

Print Quality:

Very high

 

Creality 3D CR 10s pro v2 vs Prusa i3 mk3

There are a lot of 3d printers on the market these days, but two of the most popular ones are the Creality CR-10S Pro v2 and the Prusa i3 MK3. So, which one is better?

The Creality CR-10S Pro v2 is a great printer. It has a large build volume, it prints quickly, and the quality of the prints is excellent. However, it does have some drawbacks. For example, it can be difficult to calibrate correctly, and the filament feeder sometimes jams.

The Prusa i3 MK3 is also a great printer. It has a smaller build volume than the Creality CR-10S Pro v2, but it is much easier to calibrate, and the filament feeder never jams. The quality of the prints is also very good.

Similarties:

  • The Creality CR-10S Pro and the Prusa i3 MK3 are both 3D printers that use FDM technology.
  • They have a large build volume, and they are both capable of printing high quality prints.
  • Both printers have a large build volume.
  • Both printers print quickly.
  • The quality of the prints is excellent on both printers.
  • Both printers have a build volume of 300 x 300 x 400 mm
  • They both have a resolution of 0.05 mm
  • They both use filament deposition modeling (FDM) to produce 3D prints

Differences:

  • The Creality CR-10S Pro v2 can be difficult to calibrate correctly, while the Prusa i3 MK3 is much easier to calibrate.
  • The filament feeder on the Creality CR-10S Pro v2 sometimes jams, while the filament feeder on the Prusa i3 MK3 never jams.
  • The Creality 3D CR-10S Pro v2 has a heated bed, while the Prusa i3 MK3 does not
  • The Creality 3D CR-10S Pro v2 has a built-in filament sensor, while the Prusa i3 MK3 does not
  • The Creality 3D CR-10S Pro v2 uses a Bowden extruder, while the Prusa i3 MK3 uses a direct drive extruder
  • The Creality 3D CR-10S Pro v2 has a slightly faster print speed of 300 mm/s, compared to 250 mm/s for the Prusa i3 MK3
  • The Prusa i3 MK3 is available with multiple build plate materials (including glass and PEI), while the Creality 3D CR-10S Pro v2 only has a build plate made of aluminum
  • The Prusa i3 MK3 is slightly more expensive than the Creality 3D CR-10S Pro v2
  • The Creality CR-10S Pro v2 has a smaller build volume than the Prusa i3 MK3.
  • The Creality CR-10S Pro is slightly more expensive than the Prusa i3 MK3, but it offers a few more features.
  • The Creality CR-10S Pro has a built-in filament sensor, while the Prusa i3 MK3 does not.
  • The Creality CR-10S Pro also has a higher print resolution (0.05 mm vs 0.1 mm).
  • Finally, the Creality CR-10S Pro has a heated bed, while the Prusa i3 MK3 does not.
Conclusion
Which one should you buy? That depends on your needs and what you’re looking for in a 3D printer. If you want something that’s easy to use and has all the features you need, the Prusa I3 MK3 is the better option. If you want something that’s a bit cheaper and has more customization options, the Creality 3D CR-10S Pro v2 is a good choice.

FAQ’s:

What are the key differences between the Creality 3D CR-10S Pro and the Prusa i3 MK3?

The Creality 3D CR-10S Pro has a larger build volume than the Prusa i3 MK3, at 330x330x400mm versus 210x210x200mm. The CR-10S Pro also has a higher printing speed, at 150mm/s versus 100mm/s. Additionally, the CR-10S Pro supports dual extrusion, while the Prusa i3 MK3 does not.

Which printer is better for beginners?

The Prusa i3 MK3 is a better printer for beginners than the Creality 3D CR-10S Pro, as it is easier to set up and has a smaller build volume. However, the CR-10S Pro is faster and supports dual extrusion, which may be preferable for more experienced users.

Which printer is better for more advanced users?

The Creality 3D CR-10S Pro is better for more advanced users than the Prusa i3 MK3, as it has a larger build volume and supports dual extrusion. Additionally, the CR-10S Pro has a higher printing speed than the Prusa i3 MK3.

Which printer is better for high-resolution prints?

The Prusa i3 MK3 is better for high-resolution prints than the Creality 3D CR-10S Pro, as it has a finer resolution of 0.05mm versus 0.1mm.

Additionally, the Prusa i3 MK3 is easier to set up and has a smaller build volume than the CR-10S Pro. Therefore, the Prusa i3 MK3 is better for both beginner and advanced users who are looking for high-resolution prints.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published.