Sainsmart X Creality Ender 3 Pro

The SainSmart × Creality Ender 3 Pro was a real collaboration printer — SainSmart, a long-running maker-gear retailer, sold its own edition of Creality’s Ender 3 Pro — and the question buyers asked was simple: is it the same machine, and does the badge change anything? The old version of this page answered with a duplicated paragraph and one flat error (it claimed this heated-bed printer had no heated bed). Here is the corrected, honest version.

What the SainSmart edition was

The printer at the centre of the collaboration is the Ender 3 Pro as Creality built it: the original Ender 3’s design with the Pro upgrades that mattered — a magnetic removable build surface on a heated bed, a wider, sturdier Y-axis extrusion for a more stable bed, and a branded Meanwell power supply in place of the no-name unit of the base model. SainSmart’s edition packaged and sold that machine through its own store and support channels. Mechanically and electronically, it is an Ender 3 Pro: same frame, same motion system, same class of mainboard, same 220 × 220 × 250 mm build volume.

The correction, plainly stated

The Ender 3 Pro has a heated bed — it always did, in every edition, SainSmart’s included. It is one of the Pro’s defining features, working with the magnetic surface on top of it (the bed system is explained in our magnetic bed guide). Any listing, review or older version of this page claiming otherwise is simply wrong, and it matters because it understates the machine: a heated bed is the difference between PLA-only printing and a printer that also handles PETG properly.

SainSmart edition vs buying a standard Ender 3 Pro

Aspect	What differs (and what doesn’t)
Hardware	The same Ender 3 Pro — no different motors, board or bed. Spares, upgrades and settings for the Ender 3 Pro apply unchanged.
Seller & support	The real difference: you bought from SainSmart and dealt with SainSmart’s customer service and warranty handling, not Creality’s channels.
Settings & profiles	Identical. Ender 3 Pro profiles and calibration routines apply as-is — our Cura settings guide and calibration guide are written for this exact machine.
Status today	A legacy model on both sides — the Ender 3 Pro generation has been succeeded by the V3 line. These machines remain very usable, and the secondhand/support ecosystem around the Pro is deep.

Should you buy one now?

Only secondhand, and only at secondhand logic: the SainSmart badge adds no hardware value over a standard Pro, so pay for the machine’s condition, not the collaboration. Check the usual Ender 3 Pro points — wheel and rail wear, the magnetic surface’s condition, a bed that heats evenly, and a PSU fan that runs — and you get what every Pro owner gets: a simple, endlessly documented machine that still prints well when it is kept in tune.

Frequently asked questions

Is the SainSmart Ender 3 Pro the same as the regular Ender 3 Pro?

Yes, as a machine — same frame, heated bed with magnetic surface, Meanwell PSU and build volume. The collaboration changed the seller and support channel, not the printer. Ender 3 Pro parts, upgrades and profiles apply unchanged.

Does the SainSmart × Creality Ender 3 Pro have a heated bed?

Yes. The Ender 3 Pro has always had a heated bed — it is one of the features that defines the Pro over the base Ender 3 — and the SainSmart edition is no exception. Older copies of this page claimed otherwise; that was an error.

Can I use Ender 3 Pro settings and parts with it?

Completely. Slicer profiles, calibration procedures, spare parts and upgrades for the Ender 3 Pro all apply directly, because the hardware is the Ender 3 Pro.

Is the SainSmart edition worth more secondhand?

No — value it exactly like a standard Ender 3 Pro of the same condition. The badge documents a sales collaboration; it does not change what the machine can do.