Monoprice Select Mini V2 vs Creality Ender 3

Monoprice select mini V2:

The Monoprice select mini V2 is a 3D printer that has been built for reliability and affordability. It has a small build volume of 120 x 120 x 120 mm, but it is still capable of printing high quality prints. It also has an easy to use software that makes it a great choice for beginners.

Monoprice Select Mini V2 vs Creality Ender 3

Specifications:

  • Printing technology: FFF (Fused Filament Fabrication)
  • Build volume: 115 x 65 x 155 mm (4.5 x 2.6 x 6.1 in.)
  • Layer resolution: 0.1 – 0.4 mm
  • Filament diameter: 1.75 mm
  • Nozzle diameter: 0.4 mm
  • Extruder type: Direct drive, Bowden
  • Max. extruder temperature: 260°C (500°F)
  • Bed temperature:: 100°C (212°F)
  • Operating noise:: 50 dB(A)
  • Connectivity: USB, microSD card slot
  • Weight: 6 kg (13 lb 4 oz)
  • Dimensions (WxDxH): 500 x 400 x 450 mm (19.7 x 15.7 x 17.7 in.)

Hardware:

The monoprice select mini v2 and the creality ender 3 are both great 3D printers, but they have different strengths. The monoprice select mini v2 is smaller and has a built-in screen, while the creality ender 3 is larger but has a removable build plate.

Software:

The monoprice select mini v2 uses Cura as its software, while the creality ender 3 uses Creality’s own software. Cura is a well-known and widely used software for 3D printing, while Creality’s own software is still being refined but has some great features.

Electronics:

The monoprice select mini v2 and the creality ender 3 are both great 3D printers, but they have their own unique strengths. The monoprice select mini v2 is a little bit smaller, making it a good choice for those who are limited on space.

It also has a heated bed, which is important for printing ABS and other filaments that require a higher temperature. The creality ender 3, on the other hand, is larger and has a more advanced cooling system, which makes it better suited for printing high-detail parts.

Mechanics:

The Creality Ender 3 is a better printer because it is more solidly built. It has a thicker frame, and the Z-axis is supported by two metal rods. This makes for a more stable printer that is less likely to wobble or shake during printing. The Ender 3 also has a heated bed, which helps to keep prints from warping.

The Monoprice Select Mini V2 is a cheaper printer, and it shows. It is made of thinner plastic, and the Z-axis is supported by just one metal rod. This makes the printer less stable and more prone to wobbling and shaking during printing. The Select Mini V2 also does not have a heated bed, which can cause prints to warp.

Creality Ender 3:

The Creality Ender 3 is a great 3D printer for those just starting out in the world of 3D printing. It’s easy to set up and use, and it prints fairly accurately. It also has a large build volume, which makes it perfect for larger projects.

Specifications:

  • Printing technology: FFF (Fused Filament Fabrication)
  • Build volume: 220 x 220 x 250 mm (8.7 x 8.7 x 9.8 in.)
  • Layer resolution: 0.1 – 0.4 mm
  • Filament diameter: 1.75 mm
  • Nozzle diameter: 0.4 mm
  • Extruder type: Direct drive, Bowden
  • Max. extruder temperature: 260°C (500°F)
  • Bed temperature:: 100°C (212°F)
  • Operating noise:: 50 dB(A)
  • Connectivity: USB, microSD card slot
  • Weight: 10 kg (22 lb)
  • Dimensions (WxDxH): 483 x 447 x 465 mm (19 x 17.6 x 18.3 in.)

Hardware:

The Creality Ender 3 is a great printer for those just starting out in the world of 3D printing. It’s easy to set up and use, and it prints fairly accurately. It also has a large build volume, which makes it perfect for larger projects.

Software:

The Creality Ender 3 uses Cura as its software, while the Monoprice Select Mini v2 uses Cura as its software. Cura is a well-known and widely used software for 3D printing, while Monoprice’s own software is still being refined but has some great features.

Electronics:

The Creality Ender 3 is a better printer because it is more solidly built. It has a thicker frame, and the Z-axis is supported by two metal rods. This makes for a more stable printer that is less likely to wobble or shake during printing. The Ender 3 also has a heated bed, which helps to keep prints from warping.

Mechanics:

The Creality Ender 3 is a better printer because it is more solidly built. It has a thicker frame, and the Z-axis is supported by two metal rods. This makes for a more stable printer that is less likely to wobble or shake during printing. The Ender 3 also has a heated bed, which helps to keep prints from warping.

Monoprice Select Mini V2 vs Creality Ender 3:

Which is Better?

It’s hard to say which 3D printer is better, the Monoprice Select Mini V2 or the Creality Ender 3. They are both great printers that have their own unique benefits.

The Monoprice Select Mini V2 is a great printer for beginners. It is easy to set up and use, and it has a low price tag. The Creality Ender 3 is also a great printer for beginners, but it offers more features and options than the Monoprice Select Mini V2.

The Monoprice Select Mini V2 prints smaller objects than the Creality Ender 3. It can also print at a higher resolution than the Creality Ender 3. However, the Creality Ender 3 can print larger objects than the Monoprice Select Mini V2.

Conclusion
The Creality Ender 3 is the clear winner in this comparison. It has better features, print quality, and price. The Monoprice Select Mini V2 is a good printer for entry-level users, but it can’t compare to the Ender 3. If you’re looking for a great 3D printer that won’t break the bank, the Ender 3 is your best option.

FAQ’s:

Q: What are some of the benefits of the Creality Ender 3?

A: Some of the benefits of the Creality Ender 3 include its high print quality, large build volume, and low price tag. It is also easy to use, making it a great printer for beginners.

Q: What are some of the drawbacks of the Ender 3?

A: One of the drawbacks of the Ender 3 is that it can be difficult to calibrate. It can also be challenging to print large objects on it. However, these drawbacks are outweighed by its many benefits.

Q: What is the difference between the Monoprice Select Mini V2 and the Creality Ender 3?

A: The Monoprice Select Mini V2 is a smaller, less expensive printer than the Creality Ender 3. It also has a lower print resolution than the Ender 3. However, the Ender 3 can print larger objects than the Monoprice Select Mini V2.

An industry veteran with over a decade of hands-on experience in the 3D printing realm, Hassan Khan is a leading voice when it comes to the innovative world of additive manufacturing. A mechanical engineer by training, Hassan quickly recognized the transformative potential of 3D printing, diving headfirst into the intricacies of printer design, filament research, and software optimization. His expertise has led him to collaborate with some of the top names in the 3D printing industry, advising on product development, curating workshops, and authoring research papers that push the boundaries of printing technology. At CrealityLovers.com, Hassan shares his profound knowledge, from insightful reviews and tutorials to forward-thinking op-eds that forecast the future of 3D printing. Hassan's commitment goes beyond the written word. He's been an active participant in numerous conventions, has contributed to educational initiatives aiming to introduce students to 3D printing, and has been an advocate for sustainable and eco-friendly printing practices. His dedication to the craft and his passion for sharing knowledge make him a pillar of the 3D printing community. When not exploring the latest in 3D printing, Hassan can be found mentoring young enthusiasts, prototyping his innovative designs, or collaborating with global tech giants to bring forth the next big leap in additive manufacturing. Trust in Hassan's insights stems not just from his vast experience but from his unwavering commitment to honest, accurate, and user-centric advice. Through his articles, guides, and reviews on CrealityLovers.com, Hassan Khan aims to empower every reader, from novices to industry experts, ensuring they make informed decisions in their 3D printing endeavors.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *