Creality Ender VS Creality CR

Creality Ender

It is very cheap for a 3D printer. It comes semi-assembled, so it’s easy to put together. Has a large build volume for its price range, 220 x 220 x 250mm.

The filament sensors are a great addition, they help to automatically pause prints when the filament runs out or breaks.

The power resume feature is awesome, if your power goes out in the middle of a print, it will resume from the last layer printed once power is restored.

The touch screen is responsive and easy to use. May be upgradable with different hotends and extruders in the future.

Creality Ender VS Creality CR

Creality CR:

The CR-10 is a very popular 3D printer, known for its large build volume. It’s a great printer for the price, and it’s easy to set up and use.

The power resume feature is awesome, if your power goes out in the middle of a print, it will resume from the last layer printed once power is restored.

The touch screen is responsive and easy to use. May be upgradable with different hotends and extruders in the future.

Differences:

The Creality Ender 3 is cheaper and has a larger build volume than the CR-10. The CR-10 has a better power resume feature, and may be more upgradable in the future.

Similarities:

Both printers are easy to set up and use, have responsive touch screens, and may be upgradable with different hotends and extruders.

Electronics Comparison:

The Ender 3 uses a MKS Gen L mainboard with an ATMEGA2560 chip. The CR-10 uses a Melzi 2.0 mainboard with an ATMEGA1284P chip. Both boards are open source and support Marlin firmware. The Ender 3 board has a built-in microSD card slot, while the CR-10 board does not.

Extruder Comparison:

Both printers come with Creality’s all-metal Bowden extruders. The Ender 3 extruder is rated for a maximum temperature of 240°C, while the CR-10 extruder is rated for a maximum temperature of 260°C.

Print Bed Comparison:

Both printers have heated print beds made of aluminum. The Ender 3 print bed is 220 x 220mm, while the CR-10 print bed is 300 x 300mm.

Build Volume Comparison:

The Ender 3 has a build volume of 220 x 220 x 250mm, while the CR-10 has a build volume of 300 x 300 x 400mm.

Hardware Comparison:

The Ender 3 uses M3 screws for the frame and M4 screws for the extruder, while the CR-10 uses M3 screws for both. The Ender 3 comes with a 24V power supply, while the CR-10 comes with a 12V power supply.

Software Comparison:

Both printers come with Creality’s proprietary slicer software, CR-10Slicer. The Ender 3 also supports Cura and Simplify3D.

Mechanics Comparison:

The Ender 3 uses V-slot aluminum extrusions for the frame, while the CR-10 uses 2020 aluminum extrusions. The Ender 3 has a bowden extruder, while the CR-10 has a direct drive extruder.

Motherboard Comparison:

The Ender 3 uses a MKS Gen L mainboard with an ATMEGA2560 chip. The CR-10 uses a Melzi 2.0 mainboard with an ATMEGA1284P chip. Both boards are open source and support Marlin firmware. The Ender 3 board has a built-in microSD card slot, while the CR-10 board does not.
<

Conclusion
The Creality Ender 3 is a great printer for the price, with a large build volume and easy to use touch screen interface. The CR-10 is also a great printer, known for its large build volume and power resume feature. Both printers are easy to set up and use, with responsive touch screens.

The main difference between the two printers is the build volume, with the CR-10 having a larger build area than the Ender 3. Both printers may be upgradable with different hotends and extruders in the future.

FAQ’s:

Q: What is Creality Ender?

A: Creality Ender is a popular 3D printer known for its large build volume.

Q: What is Creality CR?

A: The CR-10 is a very popular 3D printer, known for its large build volume.

Q: What are the differences between Creality Ender and CR?

A: The Creality Ender 3 is cheaper and has a larger build volume than the CR-10. The CR-10 has a better power resume feature, and may be more upgradable in the future.

Q: What are the similarities between Creality Ender and CR?

A: Both printers are easy to set up and use, have responsive touch screens, and may be upgradable with different hotends and extruders.

Q: What is the difference between the Ender 3 and CR-10’s extruders?

A: The Ender 3 uses a MKS Gen L mainboard with an ATMEGA2560 chip. The CR-10 uses a Melzi 2.0 mainboard with an ATMEGA1284P chip. Both boards are open source and support Marlin firmware. The Ender 3 board has a built-in microSD card slot, while the CR-10 board does not.

Q: What is the difference between the Ender 3 and CR-10’s print beds?

A: Both printers have heated print beds made of aluminum. The Ender 3 print bed is 220 x 220mm, while the CR-10 print bed is 300 x 300mm.

Q: What is the difference between the Ender 3 and CR-10’s build volumes?

A: The Ender 3 has a build volume of 220 x 220 x 250mm, while the CR-10 has a build volume of 300 x 300 x 400mm.

Q: What is the difference between the Ender 3 and CR-10’s hardware?

A: The Ender 3 uses M3 screws for the frame and M4 screws for the extruder, while the CR-10 uses M3 screws for both. The Ender 3 comes with a 24V power supply, while the CR-10 comes with a 12V power supply.

Q: What is the difference between the Ender 3 and CR-10’s software?

A: Both printers come with Creality’s proprietary slicer software, CR-10Slicer. The Ender 3 also supports Cura and Simplify3D.

Q: What is the difference between the Ender 3 and CR-10’s mechanics?

A: The Ender 3 uses V-slot aluminum extrusions for the frame, while the CR-10 uses 2020 aluminum extrusions. The Ender 3 has a bowden extruder, while the CR-10 has a direct drive extruder.

Q: What is the difference between the Ender 3 and CR-10’s motherboards?

A: The Ender 3 uses a MKS Gen L mainboard with an ATMEGA2560 chip. The CR-10 uses a Melzi 2.0 mainboard with an ATMEGA1284P chip.

Both boards are open source and support Marlin firmware. The Ender 3 board has a built-in microSD card slot, while the CR-10 board does not.

Q: Which printer is better, the Creality Ender 3 or the CR-10?

A: It depends on your needs and preferences. If you need a large build volume, the CR-10 is a better choice. If you need a cheaper printer, the Ender 3 is a better choice.

If you need a printer that is easier to upgrade, the CR-10 is a better choice. Ultimately, it is up to you to decide which printer is better for you.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published.