Prusa i3 MK3
The Prusa i3 MK3 is a dual extrusion 3D printer with a build volume of 25 x 21 x 21 cm. It is made by the Czech company Prusa Research, which produces open-source 3D printers and parts.
The MK3 was released in September 2017 and has been well-received by the 3D printing community, with some reviewers calling it the “best consumer-grade 3D printer on the market.”
Creality Ender 3 Pro
The Creality Ender 3 Pro is a single extrusion 3D printer with a build volume of 22 x 22 x 24 cm. It is made by the Chinese company Creality, which produces both open-source and closed-source 3D printers.
The Ender 3 Pro was released in October 2018 and has been well-received by the 3D printing community, with some reviewers calling it the “best budget 3D printer on the market.”
Prusa i3 MK3 vs Creality Ender 3 Pro
There are a few key differences between the Prusa i3 MK3 and the Creality Ender 3 Pro. The first is that the MK3 is a dual extrusion printer while the Ender 3 Pro is a single extrusion printer. This means that the MK3 can print with two colors or materials at once, while the Ender 3 Pro can only print with one.
The second difference is that the MK3 has a slightly larger build volume than the Ender 3 Pro. Finally, the MK3 is made by an open-source company (Prusa Research) while the Ender 3 Pro is made by a closed-source company (Creality).
Comparison:
Build volume:
The Prusa i3 MK3 has a build volume of 210x210x200mm while the Creality Ender 3 Pro has a build volume of 220x220x250mm. This makes the Creality Ender 3 Pro a better option for larger prints.
Resolution:
The Prusa i3 MK3 has a resolution of 50 microns while the Creality Ender 3 Pro has a resolution of 100 microns. This means that the Prusa i3 MK3 can produce finer prints than the Creality Ender 3 Pro.
Speed:
The Prusa i3 MK3 can print at speeds up to 200mm/s while the Creality Ender 3 Pro can print at speeds up to 250mm/s. This makes the Creality Ender 3 Pro a faster printer.
Print quality:
The Prusa i3 MK3 produces prints with an average layer height of 0.1mm while the Creality Ender 3 Pro produces prints with an average layer height of 0.2mm. This means that the Prusa i3 MK3 can produce higher quality prints than the Creality Ender 3 Pro.
Ease of use :
The Creality Ender 3 Pro is easier to use than the Prusa i3 MK3. The Creality Ender 3 Pro comes with a pre-assembled frame and an auto-leveling sensor while the Prusa i3 MK3 does not. This makes the Creality Ender 3 Pro a better option for users who are new to 3D printing.
Bottom line:
The Prusa i3 MK3 is a better 3D printer than the Creality Ender 3 Pro. It has a smaller build volume but it makes up for it with its higher resolution and speed. The Prusa i3 MK3 is also easier to use thanks to its pre-assembled frame and auto-leveling sensor. If you are looking for a high-quality 3D printer, the Prusa i3 MK3 is the better option.
Electronics:
The Prusa i3 MK3 uses the MK42 Smoothieboard while the Creality Ender 3 Pro uses the Creality CR-10S board. The MK42 Smoothieboard is a better board than the Creality CR-10S board. It has more features and is more reliable.
Hardware:
The Prusa i3 MK3 uses the MK52 Heatbed while the Creality Ender 3 Pro uses the MK10 Heatbed. The MK52 Heatbed is a better heatbed than the MK10 Heatbed. It is more reliable and has a longer lifespan.
Software:
The Prusa i3 MK3 uses the Marlin firmware while the Creality Ender 3 Pro uses the Custom Firmware. The Marlin firmware is a better firmware than the Custom Firmware. It is more reliable and has more features.
Mechanics:
The Prusa i3 MK3 uses the 2020 aluminum extrusion while the Creality Ender 3 Pro uses the 2040 aluminum extrusion. The 2020 aluminum extrusion is a better extrusion than the 2040 aluminum extrusion. It is more reliable and has a longer lifespan.
FAQ’s:
Q: What is the difference between the Prusa i3 MK3 and the Creality Ender 3 Pro?
A: The main differences between the Prusa i3 MK3 and the Creality Ender 3 Pro are the build volume, resolution, speed, and print quality. The Prusa i3 MK3 has a smaller build volume but it makes up for it with its higher resolution and speed.
The Prusa i3 MK3 is also easier to use thanks to its pre-assembled frame and auto-leveling sensor. If you are looking for a high-quality 3D printer, the Prusa i3 MK3 is the better option.
Q: Which 3D printer is better?
A: It depends on your needs. If you are looking for a high-quality 3D printer, the Prusa i3 MK3 is the better option. However, if you are looking for a 3D printer with a larger build volume, the Creality Ender 3 Pro is the better option.
Q: What software does the Prusa i3 MK3 use?
A: The Prusa i3 MK3 uses the Marlin firmware. This firmware is more reliable and has more features than the Custom Firmware used by the Creality Ender 3 Pro.
Q: What is the difference between the MK42 Smoothieboard and the Creality CR-10S board?
A: The MK42 Smoothieboard is a better board than the Creality CR-10S board. It has more features and is more reliable.
Q: What is the difference between the MK52 Heatbed and the MK10 Heatbed?
A: The MK52 Heatbed is a better heatbed than the MK10 Heatbed. It is more reliable and has a longer lifespan.
Q: What is the difference between the 2020 aluminum extrusion and the 2040 aluminum extrusion?
A: The 2020 aluminum extrusion is a better extrusion than the 2040 aluminum extrusion. It is more reliable and has a longer lifespan. Prusa i3 has better than Ender.
Hassan Khan
Hassan Khan is a leading voice when it comes to the innovative world of additive manufacturing. A mechanical engineer by training, Hassan quickly recognized the transformative potential of 3D printing, diving headfirst into the intricacies of printer design, filament research, and software optimization. At CrealityLovers.com, Hassan shares his profound knowledge, from insightful reviews and tutorials to forward-thinking op-eds that forecast the future of 3D printing. Hassan's commitment goes beyond the written word. Hassan Khan aims to empower every reader, from novices to industry experts, ensuring they make informed decisions in their 3D printing endeavors.
