Creality CR-10 VS 10s

What is Creality CR-10:

The CR-10 is a 3D printer made by the company Creality. It was released in 2016 and has been very popular since then. It is a well-built machine with a lot of features that makes it a great value for the price.

CR-10s:

The CR-10s is an updated version of the CR-10 that was released in 2017. The main difference between the two models is that the CR-10s has a built-in filament sensor that pauses the printing process when the filament runs out. Other than that, they are very similar machines.

Differences:

The main difference between the CR-10 and CR-10s is the filament sensor. The CR-10s also has an updated control board and a few other minor improvements.

Similarities:

Both the CR-10 and CR-10s are great value 3D printers that are easy to use and have a lot of features. They both have a large build volume, heated bed, and support a wide range of filament types.

Creality CR-10 VS 10s

COMPARISON

Comparison of Electronics:

Both the CR-10 and CR-10s use the same electronics. The CR-10s just has an updated control board.

Comparison of Hardware:

The CR-10 and CR-10s have the same physical dimensions. The only difference is that the CR-10s has a built-in filament sensor.

Comparison of Software:

The CR-10 and CR-10s use the same software. The only difference is that the CR-10s has an updated control board which might allow for future updates.

Comparison of Mechanics:

The CR-10 and CR-10s have the same mechanics. The only difference is that the CR-10s has a built-in filament sensor.

Comparison of Build Quality:

The CR-10 and CR-10s have the same build quality. They are both well-built machines with a lot of features.

Comparison of Heated bed:

The CR-10 and CR-10s have the same heated bed. They are both able to reach high temperatures quickly.

Comparison of Extruder:

The CR-10 and CR-10s have the same extruder. They are both able to print with a wide range of filament types.

Comparison of Ease of use:

The CR-10 and CR-10s are both easy to use. They have a lot of features that make them user friendly.

Comparison of Support:

The CR-10 and CR-10s have the same support. They both come with a lot of documentation and have an active online community.

Comparison of Firmware:

The firmware is the same on both printers.

Comparison of Build Volume:

Both printers have the same build volume of 300x300x400mm.

Comparison of Filament Support:

Both printers support a wide range of filament types including PLA, ABS, PETG, and more.

Comparison of Price:

The CR-10s is a bit more expensive than the CR-10 due to the added filament sensor feature. However, both printers are still very affordable compared to other 3D printers on the market.

Which one should you buy?

If you are looking for a 3D printer that is easy to use and has a lot of features, then either the CR-10 or the CR-10s would be a great choice. If you want a machine with a built-in filament sensor, then the CR-10s would be the better option. Otherwise, they are very similar machines and it would just come down to personal preference.

Conclusion
The CR-10 and CR-10s are both great value 3D printers that are easy to use and have a lot of features. They both have a large build volume, heated bed, and support a wide range of filament types. The main difference between the two models is that the CR-10s has a built-in filament sensor. Otherwise, they are very similar machines.

FAQ’s:

What is Creality?

Creality is a 3D printer manufacturer that is known for their affordable and easy-to-use machines. They offer a wide range of 3D printers, including the CR-10 and CR-10s. Both of these printers are great value machines that are easy to use and have a lot of features.

The main difference between the two models is that the CR-10s has a built-in filament sensor. Otherwise, they are very similar machines.

CR-10? CR-10s? What’s the difference?

The main difference between the CR-10 and CR-10s is that the CR-10s has a built-in filament sensor. Otherwise, they are very similar machines. The CR-10s is a bit more expensive than the CR-10 due to the added filament sensor feature. However, both printers are still very affordable compared to other 3D printers on the market.

Should I buy the Creality CR-10 or CR-10s?

If you want a machine with a built-in filament sensor, then the CR-10s would be the better option. Otherwise, they are very similar machines and it would just come down to personal preference.

What is the warranty on Creality printers?

The warranty on Creality printers is typically 1 year, but it can vary depending on the model and where you purchase it from.

Is the CR-10s a good printer?

The CR-10s is a great value 3D printer that is easy to use and has a lot of features. It has a large build volume, heated bed, and supports a wide range of filament types. The only downside is that it does not have an enclosed build area which means that it might not be ideal for printing ABS filament.

What is the difference between the CR-10 and the CR-10s?

The main difference between the CR-10 and the CR-10s is that the CR-10s has a built-in filament sensor. Otherwise, they are very similar machines.

Is the CR-10s an updated version of the CR-10?

Yes, the CR-10s is an updated version of the CR-10 that was released in 2017. The main difference between the two models is that the CR-10s has a built-in filament sensor that pauses the printing process when the filament runs out. Other than that, they are very similar machines.

Do both printers have a large build volume?

Yes, both printers have a build volume of 300x300x400mm.

Do they both come with a lot of documentation and support?

Yes, both printers come with a lot of documentation and have an active online community.

Is the CR-10s more expensive than the CR-10?

Yes, the CR-10s is a bit more expensive than the CR-10 due to the added filament sensor feature. However, both printers are still very affordable compared to other 3D printers on the market.

Which one should you buy?

If you are looking for a 3D printer that is easy to use and has a lot of features, then either the CR-10 or the CR-10s would be a great choice. If you want a machine with a built-in filament sensor, then the CR-10s would be the better option. Otherwise, they are very similar machines and it would just come down to personal preference.

An industry veteran with over a decade of hands-on experience in the 3D printing realm, Hassan Khan is a leading voice when it comes to the innovative world of additive manufacturing. A mechanical engineer by training, Hassan quickly recognized the transformative potential of 3D printing, diving headfirst into the intricacies of printer design, filament research, and software optimization. His expertise has led him to collaborate with some of the top names in the 3D printing industry, advising on product development, curating workshops, and authoring research papers that push the boundaries of printing technology. At CrealityLovers.com, Hassan shares his profound knowledge, from insightful reviews and tutorials to forward-thinking op-eds that forecast the future of 3D printing. Hassan's commitment goes beyond the written word. He's been an active participant in numerous conventions, has contributed to educational initiatives aiming to introduce students to 3D printing, and has been an advocate for sustainable and eco-friendly printing practices. His dedication to the craft and his passion for sharing knowledge make him a pillar of the 3D printing community. When not exploring the latest in 3D printing, Hassan can be found mentoring young enthusiasts, prototyping his innovative designs, or collaborating with global tech giants to bring forth the next big leap in additive manufacturing. Trust in Hassan's insights stems not just from his vast experience but from his unwavering commitment to honest, accurate, and user-centric advice. Through his articles, guides, and reviews on CrealityLovers.com, Hassan Khan aims to empower every reader, from novices to industry experts, ensuring they make informed decisions in their 3D printing endeavors.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *